How to Reupholster a Dining Chair

Yes.  It’s true.  I’m a cheapskate.

I blame it on my dad.

He is a first-rate bargain hunter.  Finding name brand clothes for 75% off.  Rummaging through flea market tables.  Making things himself to save money.

It’s in my genes.  I was defenseless I tell you!

That’s why I had to reupholster my dining room chairs myself.

I couldn’t help it.

It had to be a DIY project.

Otherwise, my bargain Craig’s List upholstered dining chairs would not have been the steal I was bragging about.

They would have been…expensive.

Gasp!

I know.  The horror.

I smashed my finger a time or two.

I said a few bad words and then apologized to my children.

I didn’t wear makeup or wash my hair for a few days.  Yes, I smelled bad (hubby was traveling so I could get away with it and my kids are young enough not to care).

In the end, it was worth it.

I really am pleased with myself even if my eyes went a little kooky looking at all that buffalo check up close day after day.

If you’re a cheapskate too and you’re just aching to tackle a project like this, here’s how I did it:


DIY Reupholstery Tutorial:

Step 1: 
Remove staples and any tacks.
I used three tools to remove my staples and tacks.

First, I used a tack remover like this one you can find at Amazon.com.


Then I used a combination of a flat head screwdriver and this amazing upholstery staple remover that I bought at a local upholstery supply store.


This part of the process was by far my least favorite part.  Whoever originally upholstered these chairs used a million staples.  The purchase of my staple remover tool made it so much easier and it was definitely worth the $15 investment!

Step 2:
Remove old fabric.
This sort of happens at the same time you remove the staples but sometimes it takes a some ripping and pulling!  In my case, there were so many layers and so many staples I only removed the old stuff down to a single layer of fabric on the inside back and the seat of the chair.  By this point, I had already removed several layers that included upholstery tacks, hundreds of staples, cording, cardboard pieces and the black fabric on the underside of the chair.  Since I was doing several chairs I decided the old remaining layer was going to stay!

Step 3:
Cut new fabric.
Use old fabric as a cutting guide for new fabric.  IMPORTANT:  If you have patterned fabric you must allow extra yardage so the pattern will line up with other fabric pieces on the chair.  For example, I first installed the front back of the chair seat (the part were your back rests) and was careful to install the fabric so a main line of the check was centered on the chair.  Then, I installed the seat cushion, carefully matching the pattern to the chair back.  I had to cut my pieces larger than the original fabric to accommodate for the pattern on the fabric.

Step 4:
Apply new fabric to the chair.
I applied the fabric in this order:
1. The inside seat back (the part where your back rests)
2. The seat cushion
3. The back of the back rest (the part you see from the back)

 

It’s important how you staple the fabric on.  (In my case, I needed to keep the checks straight and make sure they weren’t going on at an angle.)

Carefully staple the fabric on to the seat back beginning at the top with a single staple in the middle, then pulling and smoothing and stapling the middle sides. Follow this same process for both the inside seat back and the seat cushion.

I’ve numbered the pictures below so you can see in what order I did my stapling:

After you have filled in and have a whole bunch of staples, inspect your work!  Then, trim off any excess fabric. I trimmed mine so there was about an inch or so beyond the staples.

Step 5: 
Apply fabric to the chair back.
(My little photography helper wasn’t around when I did this part so my photos show after the chair was complete.)



This part is installed a little differently than the rest of the chair because you must fold under the edges to give it a nice crisp edge.

You could also use cording here, but I didn’t want to add to the cost and I thought it looked nice without it.

You must also carefully place your staples in a line so that the upholstery tacks will cover them up when you’re finished.

This part is not difficult, it just takes a little patience.  Using T- pins (what I called upholstery pins in the photo) really help keep the fabric in place when you first get started.

Step 6:
Install the finishing touches — upholstery tacks.
I was able to re-use the strands of upholstery tacks that were previously on the chair saving myself a bundle. I did, however, have to buy new individual tacks to re-install them.  It was easy peasy.  Just put the new tack through the hole and hammer with either a small hammer or a special upholstery tack hammer.  I used a small hammer I already owned.

Finished!

 
 

I’m not going to lie…doing four chairs was a lot of work, but I’m so happy I did it myself.  I easily saved $600 by DIYing it.

If you’re interested in trying this at home, check out my post where I give you tips for doing reupholstery yourself.  Included in that post is a link to a fabric yardage guide so you’ll know how much fabric your project might require.

Sometimes it really pays to be a cheapskate.

Thanks so much for stopping by today!

Sharing at:
Tickled Pink Times Two
Between Naps on the Porch
Cedar Hill Ranch
Thrifty Decor Chick
Savvy Southern Style
Miss Mustard Seed
 
Don't forget to share...Pin on PinterestShare on FacebookShare on Google+Tweet about this on TwitterShare on StumbleUpon
25 Comments
POSTED IN:

Share on facebook | Share on Twitter | Pin on Pinterest



25 Responses to How to Reupholster a Dining Chair

  1. Debra Oliver says:

    I really admire your “cheapskatedness”! you did a wonderful job on them. love that great buffalo check!

  2. Moni - Zuhaus at Home says:

    Your chairs turned out gorgeous…you did a great job!!

  3. NanaDiana says:

    You probably saved more than that, Julie. Those turned out great- I love them- xo Diana

  4. Jeanette Chaney says:

    I’m a proud cheapskate like my dad too! You did an incredible job!

  5. Petra says:

    I am not a good sewer at all but I love it – mainly simple square/rectangle shaped things!!! I really loved the way you explained this – made it sound and look reasonably easy (although time-consuming)! Now, if only I could find a simple way to reupholster my couch!

  6. hugskissesandsnot.com says:

    Beautiful! Great tutorial. Now, can you come and do my couch? 🙂

  7. Katie Clooney says:

    Julie… these look SOOO professional!! Love them! I’m a cheapskate too but not as talented as you. I am in awe.

  8. Pat Cantwell says:

    Julie,
    Amazing!!!
    Wha a transformation, dear one!!!
    Thank you for sharing this tutorial with us!
    Visiting from Susan’s MM!!!
    Fondly,
    Pat

  9. Tammy @ A Walk in the Countryside says:

    Beautiful job! I love the fabric you used!

  10. Shirley@Housepitality Designs says:

    Wow…I know it was not a simple task to re-cover those chairs, but you have made it look so easy by your wonderful tutorial…and I have used those tacks in another project and I love them…you did a gorgeous job!!!

  11. Toodie says:

    Those are gorgeous! Loving the fabric and the look.

  12. antiquenehomes says:

    Wow! Great work! I’m going to need this tutorial since my cats recently ruined one of my dining room chairs similar to yours! I am a big fan of gingham and buffalo check fabric. Love the fabric you chose.

    Have a great day!
    Christine
    @ Antique Homes and Lifestyle

  13. Style Sisters says:

    Awesome tutorial!! Wow those chairs look fabulous…you are a great cheapskate 🙂 Please come link up to Centerpiece Wednesday on my blog and share this post with us. http://thestylesisters.blogspot.com/2013/09/welcome-to-centerpiece-wednesday-91.html
    Karin

  14. Marti @ SewLicious Home Decor says:

    Love the chairs and the color of fabric, it looks great!! I have a link party going on and would love for you to stop by and link up!

    Marti
    http://sewlicioushomedecor.com/

  15. Laura @ Top This Top That says:

    what a fabulous job and great tutorial!

  16. Nancy B says:

    I love this tutorial. I have at least 4 chairs in my house that need to be re-upholstered but I’ve been nervous to try it. You make it look do-able! Thanks!!

  17. Sharon @ mrshinesclass says:

    These chairs look fantastic. And I love the buffalo check!

  18. Pingback: Creating a Pottery Barn Inspired Fall Tablescape - www.lilacsandlonghorns.com

  19. tammy Sides says:

    These are very pretty. I have a set of four chairs that have the backs glued in, would you have any ideas on that?

  20. Anna says:

    Thanks so much for such a great tutorial and great detail and pics. Your chairs are gorgeous! Fantastic professional looking job. Now I need to get started on my own! Thanks for great instruction!! 🙂

  21. Pingback: Kitchen Chair Makeover {IKEA Gingham Fabric} - Lilacs and LonghornsLilacs and Longhorns

  22. Peter Theriault says:

    Hi
    Love the loo of your set and the work you did. I have a set that has a cut out chair. I never noticed ntil I turned it over. The job is different with an interlocking strap only over the hole to support the seat. Any suggestions?
    Peter

  23. Rosemary says:

    Hi there. Thank you so much for this helpful post!! I bought 6 chairs almost identical much to yours with the plan to recover them. We are thinking of leather. Do you recall how much fabric you needed per chsir?

  24. Gail Somerville says:

    Hi Julie: not my first upholstery job but I’m just getting started on re doing my 8 dining room chairs. Step 1, inside back, right? Can you tell me the best way to make the cuts at the lower bottom corners of the back piece so that they tuck into the space between back and seat and look neat on the outside corners? I would really appreciate your comments. Thanks, Gail

    Reply

Leave a Reply to Shirley@Housepitality Designs Cancel reply

Your email address will not be published. Required fields are marked *